|
|
High Performance Penetrating Sealer
Hybrid Carrier Technology™
Through the discovery of a revolutionary water/solvent blending process, this product offers the convenience and safety of a water-based formula combined with the ease of use and performance of a solvent-based formula. Hybrid Carrier Technology™ is an evolutionary leap in sealer development and brings you the best of both worlds.
Penetrates and protects grout, natural stone and other porous masonry materials; an excellent choice for sealing grout in porcelain and glass tile pool installations. Forms an invisible, no-sheen barrier that is resistant to water and oil and provides superior stain protection.* Low residue formula is specially designed to be easier and faster to apply than traditional penetrating sealers. May be applied to dry, damp, cured or uncured grout or natural stone (seriously... immediately after grouting!).
*Based on CTI-T72 stain testing.
- Low Residue – Low odor – Low VOC
- Protects grout, stone and porous masonry materials
- Seal the same day you grout
- Maintains natural look with no sheen
Available in:
1 gallon (Item # OCG-50-0005)
1 quart (Item # OCG-50-0004)
Coverage:
1 gallon = 500-2500 sq. ft.
1 quart = 125-625 sq. ft.
High Performance Penetrating Sealer
Hybrid Carrier Technology™
Application
Always test product in an inconspicuous area to determine suitability
for intended use. May slightly darken some surfaces. Suitability for a
particular purpose is always the responsibility of the user.
Protect and mask surrounding area.
- Make sure the surface to be sealed is thoroughly clean and free from wax,
sealants or coatings of any kind.
- Evenly apply sealer with a low-pressure, solvent resistant sprayer or natural fiber brush.
- Allow sealer to penetrate for 1-3 minutes. Do not allow unabsorbed sealer to dry on the surface.
- Buff unabsorbed sealer from the surface with a clean, dry cloth. If dried sealer residue is present on the surface, apply additional sealer, agitate and buff dry.
- Apply second coat as soon as a surface is dry to the touch. Depending on surface porosity, additional coats may be necessary to achieve desired result; multiple light coats will perform better than one heavy coat.
- Cure for a minimum of 24 hours before water exposure.
- Identify
- |
- Composition
- |
- Properties
- |
- Fire Measures
- |
- Stability & Reactivity
- |
- Health Data
- Storage & Handling
- |
- Precautions
- |
- Exposure Control
- |
- Regulatory Information
- |
- Transportation
|
Product Name
|
High Performance Penetrating Sealer - Hybrid Carrier Technology™
|
|
Chemical Family
|
Fluoroalkyl methacrylate copolymer emulsion
|
|
Emergency Infotrac Number
|
800-535-5053
|
|
|
|
|
Date Prepared
|
May 18, 2012
|
|
Prepared By
|
Oceanside Glasstile Phone: 760 929-4000
|
|
COMPONENT
|
CAS. NO.
|
WEIGHT (%)
|
OSHA (PEL)
|
ACGIH (TLV)
|
| Water |
7732-18-5 |
75-90 |
None |
None |
| Acetone |
67-64-1 |
1-6 |
1000 ppm |
500 ppm |
| Fluoroalkyl methacrylate copolymer |
Trade Secret |
4-8 |
None |
None |
| Emulsifiers |
Trade Secret |
4-8 |
None |
None |
| Tripropylene glycol |
24800-44-0 |
1-3 |
None |
None |
|
Boiling Point (°C)
|
Approx. 100 °C (Water)
|
|
Freezing Point (°C)
|
Approx. 0 °C
|
|
Specific Gravity (H2O=1)
|
Approx. 1.1 at 25 °C
|
|
Vapor Pressure
|
No Data
|
|
Vapor Density
|
No Data
|
|
Evaporation Rate (Butyl acetate=1)
|
No Data
|
|
pH
|
n/a
|
|
Solubility In Water
|
Miscible
|
|
VOC’s
|
< 89 g/L
|
|
Flash Point (Method Used)
|
Not tested
|
|
Flammable Limits
|
LEL
|
Not tested
|
UEL
|
Not tested
|
|
Hazardous Combustion Products
|
Toxic by-products including hydrofluoric acid, perfluoroisobutylene, and carbonyl fluoride may be formed at very high temperatures.
|
|
Extinguishing Media
|
Alcohol foam, CO2, dry chemical or water spray
|
|
Protective Equipment
|
Use NIOSH/MSHA approved SCBA and bunker gear. Evolution of acidic gases may require complete wash down of protective clothing prior to removal.
|
Hazard Ratings
|
Rating (based on HMIS Standard)
|
(4 = Extreme, 3 = High, 2 = Moderate, 1 = Slight, 0 = Minimal)
|
|
Health
|
1
|
|
Flammability
|
1
|
|
Reactivity
|
0
|
|
Stability
|
Stable
|
|
Conditions To Avoid
|
Excessive heat, sparks, open flame
|
|
Hazardous Polymerization
|
Should not occur
|
|
Incompatibilities
|
May react with metals, such as sodium, magnesium, aluminum at elevated
temperatures (above 425 °C); may react upon prolonged exposure to fluorine or in
oxygen-fluorine mixtures at high temperatures and pressures. Contact with
incompatible materials may result in fire or explosion. Hazardous decomposition
or by-products and toxic by-products including hydrofluoric acid, perfluoroisobutylene,
and carbonyl fluoride may be formed at very high temperatures.
|
| Signs and Symptoms of Exposure |
|
Ingestion
|
May be harmful if swallowed.
|
|
Eye Contact
|
May cause mild irritation.
|
|
Skin Contact
|
May cause skin irritation and sensitization.
|
|
Inhalation
|
May cause respiratory irritation.
|
|
| Emergency First Aid Procedures |
|
Ingestion
|
Consult a physician immediately.
|
|
Eye Contact
|
Flush with large amounts of water for 10-15 minutes. Consult a physician if needed.
|
|
Skin Contact
|
Wash affected area with soap and water. Remove contaminated clothing and shoes.
|
|
Inhalation
|
Leave the contaminated area and seek fresh air. If breathing is difficult, contact a physician.
|
| GET MEDICAL ATTENTION AS NECESSARY. |
| HANDLING |
|
Follow safe industrial hygiene practices and wear proper protective equipment.
|
|
Use only in well ventilated areas.
|
|
Safety showers & eyewashes should be available in the work area.
|
|
Wash hands thoroughly after handling. Wash clothing after use.
|
|
Avoid contact with the skin or eyes.
|
|
Do not breathe vapor or spray.
|
|
Do not store or consume food, drink or tobacco in areas where they may become contaminated with this material.
|
|
| STORAGE |
|
Store material at –5 °C (23 °F) to 30 °C (86 °F).
|
|
Keep away from heat, steam, and sunlight.
|
|
Keep containers tightly closed when not in use.
|
| Accidental Release Measures |
|
Ensure cleanup is done only by trained personnel wearing appropriate personal protective equipment.
|
|
Ventilate area and cover with absorbent material.
|
|
Collect spilled material in a container and seal.
|
|
Spilled material is a slipping hazard.
|
|
|
|
Toxilogical Information
|
Excessive exposure to thermal degradation products could result in delayed pulmonary edema in some cases, and on very high exposure, damage to the liver and kidneys. These substances may include: perfluoroisobutylene (TLV = 10 ppb), carbonyl fluoride (TLV = 2 ppm TWA, 5 ppm STEL), hydrogen fluoride (TLV = 2 ppm Ceiling, 0.5 ppm TWA).
|
|
Ecological Information
|
BIODEGRADABILITY: No data
BIOACCUMULATION: No data
|
|
Disposal Considerations
|
Comply with Federal, State and Local regulations concerning health and environment when disposing of materials. Regulations may also apply to empty containers, liners, or rinsate. DO NOT INCINERATE unless incinerator is capable of scrubbing hydrogen fluoride and other acidic combustion products.
|
|
Respiratory Protection
|
Use respirator suitable for protection when spraying this material. If material is heated above 200 °C, use a positive pressure air supplied respirator or SCBA.
|
|
Eye Protection
|
Safety glasses with side shields or goggles.
|
|
Protective Clothing
|
Chemical resistant gloves.
|
|
Ventilation
|
If material is heated above 200 °C, use local exhaust ventilation.
|
|
Other Protective Equipment
|
Eyewash station and safety shower.
|
|
TSCA
|
All components of this product are in compliance with the inventory listing requirements of the U.S. Toxic
Substance Control Act (TSCA) Chemical Substance Inventory.
The base polymer is subject to a consent order regarding a premanufacturing notice under Section 5(e) of TSCA.
In addition, the base polymer is subject to export notification under Section 12 (b) of TSCA.
|
|
Other
|
States such as Pennsylvania, New Jersey, California, Vermont, Massachusetts and Rhode Island may have
specific requirements or components of this product listed; consult specific state regulatory requirements for
additional information.
|
|
UN Classification
|
Not applicable
|
|
D.O.T. Hazard Description
|
Not applicable
|
|
Canadian Transportation Of Dangerous Goods (TDG)
|
Not applicable
|
High Performance Enhancing Sealer
A water based, low VOC, all in one color enhancer and penetrating sealer for both interior and exterior applications. Intensifies and enriches the color of natural stone, grout, concrete and other porous masonry materials. Forms a barrier that is resistant to water and oil and provides superior stain protection.
- Intensifies and enriches natural stone color
- Superior stain protection for stone and grout
- Low odor – Low VOC
- Interior and exterior use
Available in:
1 gallon (Item # OCG-37-4971)
1 quart (Item # OCG-37-4970)
8 oz. (Item # OCG-37-4972)
Coverage:
1 gallon = 200-1500
1 quart = 50-375 sq. ft.
8 oz. = 10-90 sq. ft.
High Performance Enhancing Sealer
Application
Color enhancement results will vary depending on the sealed material’s color and porosity; always test product in an inconspicuous area. Determining the suitability for a particular purpose is the user’s responsibility. Protect and mask surrounding surfaces.
- Cure stone, grout and concrete installations a minimum of 72 hours prior to sealing.
- Make sure the surface to be sealed is thoroughly clean, dry and free from wax, sealants or other coatings.
- Evenly apply sealer with foam/fiber brush, roller or low-pressure sprayer.
- Allow sealer to penetrate for approximately 1-3 minutes but do not allow unabsorbed sealer to dry on the surface.
- Buff unabsorbed sealer from the surface with a clean, dry cloth. If dried sealer residue is present, apply additional sealer, agitate and buff dry.
- Depending on surface porosity, additional coats may be necessary to achieve desired result; multiple light coats will perform better than one heavy coat. Allow a minimum of 30 minutes between coats.
- Cure for a minimum of 24 hours before water exposure. Optimal performance will be achieved in 48 hours.
- Identify
- |
- Composition
- |
- Properties
- |
- Fire Measures
- |
- Stability & Reactivity
- |
- Health Data
- Storage & Handling
- |
- Precautions
- |
- Exposure Control
- |
- Regulatory Information
- |
- Transportation
|
Product Name
|
High Performance Enhancing Sealer
|
|
CAS Registry
|
Mixture
|
|
Oceanside Glasstile Number
|
760 929-4000
|
|
24 Hour Emergency Number
|
800 535-5053
|
|
All ingredients are listed in EPA's TSCA list of chemical substances
|
|
COMPONENT NAME
|
CAS. NO.
|
Wt%
|
OSHA (PEL)
|
ACGIH (TLV)
|
| Water |
7732-18-5 |
35-85 |
None |
None |
| Fluoroalkyl methacrylate copolymer |
Trade Secret |
1-18 |
None |
None |
| Emulsifiers |
Trade Secret |
2-15 |
None |
None |
| Isopropyl Alcohol |
67-63‐0 |
1-2 |
400 ppm |
400 ppm |
|
Boiling Point
|
212°F
|
|
Specific Gravity (H2O=1)
|
1.00
|
|
Vapor Pressure
|
NA
|
|
Vapor Density (Air=1)
|
NA
|
|
Percent Volatile By Weight
|
80
|
|
Evaporation Rate (BuAc=1)
|
NA Solubility
|
|
in Water
|
Miscible
|
|
Appearance and Odor
|
White/Mild
|
|
VOC’s
|
< 80 g/L
|
|
Flash Point (Method Used)
|
>200°F (Closed Cup)
|
|
Flammable Limits in Air (% By Volume)
|
NA
|
|
Extinguishing Media
|
Water spray, foam, dry chemical, CO2.
|
|
Special Fire Fighting Procedures:
|
Evacuate personnel to a safe area. Wear self-‐contained breathing apparatus. Wear full protective equipment.
|
|
Unusual Fire and Explosion Hazard
|
None. Burning may produce toxic vapors, including formic acid, carbon dioxide, and formaldehyde.
|
Hazard Ratings
|
Rating (based on HMIS Standard)
|
(4 = Extreme, 3 = High, 2 = Moderate, 1 = Slight, 0 = Minimal)
|
|
Health
|
1
|
|
Flammability
|
0
|
|
Reactivity
|
0
|
|
Conditions to Avoid
|
Store in a well-‐ventilated place at temperatures below 90°F.
|
|
Incompatibilities
|
Avoid contact with strong oxidizing agents and acids. Aluminum at high temps
|
|
Hazardous Decomposition or By Products
|
Combustion may produce CO2, CO and nitrous oxides. Hazardous Polymerization May Not Occur
|
|
Primary Routes of Entry
|
Inhalation: No
|
Dermal: Yes
|
Ingestion: Yes
|
|
Acute Health hazard
|
No information available
|
|
Chronic Health Hazard
|
No information available
|
|
Carcinogenicity
|
No information available
|
|
NTP: No
|
IARC Monograph: No
|
OSHA Regulated: No
|
|
| Signs and Symptoms of Exposure |
|
Skin Contact
|
Prolonged and repeated contact with skin can cause defatting and drying of the skin resulting in skin irritation and dermatitis.
|
|
Eye Contact
|
Preexisting eye, skin and respiratory disorders may be aggravated by exposure to this product.
|
|
Ingestion
|
Although ingestion is unlikely, liquid would irritate upper digestive tract if swallowed.
|
|
Inhalation
|
Exposure to high vapor concentrations may cause eye and respiratory tract irritation, headache, dizziness, nausea, lack of coordination, drowsiness and loss of consciousness.
|
|
| Medical Condition Generally Aggravated by Exposure |
|
None known
|
|
| Emergency First Aid Procedures |
|
Eyes
|
Immediately flush eyes with plenty of water for 15 minutes. Seek medical attention if any irritations continue.
|
|
Skin
|
Rinse skin with plenty of water for 15 minutes. Seek medical attention if needed.
|
|
Ingestion
|
If swallowed drink a lot of water for 15 minutes. Do not induce vomiting. Seek medical attention if any stomach irritations continue.
|
|
Inhalation
|
Remove person to fresh air. Seek medical attention if any symptoms persist.
|
| Steps to be taken in Case the Material is Released or Spilled: |
|
Soak up with sawdust, sand, oil dry or other absorbent material.
|
|
| Waste Disposal Method: |
|
Dispose of according to EPA, State and Local regulations.
|
Precautions to be taken
in Handling and Storage: |
Store at temperatures between 40°F (4.4°C) to 95°F (43.3°C). Store in a tightly closed container. Store in a well ventilated area. Store away from oxidizing agents, sources of heat, direct sunlight or rain. No smoking in area of storage.
|
|
Respiratory Protection
|
Protective mask for vapor concentrations above exposure limits.
|
|
Ventilation
|
Local exhaust
|
|
Eye Protection
|
Safety glasses should be worn
|
|
Protective Gloves
|
Rubber or plastic gloves should be worn
|
|
Protective Clothing
|
Rubber apron
|
|
Other Protective Equipment
|
NIOSH approved respirator as needed
|
|
Other Precautions
|
Wash hands after use.
|
|
High Performance Enhancing Sealer is classified non-hazardous and is not regulated by DOT.
|
Calcium Releaser
A non-toxic, acid-free cleaner that effectively removes calcium deposits and efflorescence from pool tile. Calcium deposits are removed in layers through the use of advanced acid-mimic technology, which specifically targets mineral build-up without damage to the tile surface or metal finishes. When applied prior to media-blasting, Calcium Releaser softens and loosens deposits, which allows for the use of less aggressive media, reduced blasting time and reduced media consumption. Designed for use with porcelain, ceramic, glass and iridescent glass tile.
- Environmentally friendly ~ Acid free ~ Non-toxic
- Removes heavy calcium deposits and efflorescence
- Designed for porcelain, ceramic, glass and iridescent glass tile
- Does not affect pool pH
Available in:
1 gallon (Item # OCG-50-1005)
1 quart (Item # OCG-50-1004)
8 oz. (Item # OCG-50-2496)
Coverage:
1 gallon = ~300 sq. ft.
1 quart = ~75 sq. ft.
Calcium Releaser
Application
This product may etch some materials that contain minerals (concrete or natural stone). Dark colored grouts (particularly grey) may retain a white residue after cleaning with this product. If desired, the residue may be removed by cleaning with a mild acid cleaner (sulfamic acid). Always test product in an inconspicuous area to determine suitability for intended use. Protect and mask surrounding finishes.
- If necessary, lower water level to expose calcium deposits and remove surface oil/film by cleaning with Oceancare All Natural Degreaser.
- Allow calcium deposits to completely dry. Calcium Releaser is most effective when applied to dry deposits.
- Apply Calcium Releaser liberally and allow it to sit several minutes; the product will react with the calcium and bubble. If using as a media-blasting pretreatment, allow product to sit a minimum of 10 minutes before blasting.
- Scrub with a mildly abrasive nylon scrub-pad (3M WHITE OR BLUE PAD).
- Repeat steps 3 and 4 until deposits are completely removed.
- Rinse thoroughly with clean water.
Note: To increase effectiveness, heat Calcium Releaser to 10 degrees F warmer than ambient air temperature.
- Identify
- |
- Composition
- |
- Properties
- |
- Fire Measures
- |
- Stability & Reactivity
- |
- Health Data
- Storage & Handling
- |
- Precautions
- |
- Exposure Control
- |
- Regulatory Information
- |
- Transportation
|
Product Name
|
Calcium Releaser
|
|
Product Use
|
Pool & Spa Cleaner
|
|
24-Hour Emergency Infotrac Number
|
800-535-5053
|
|
Date Prepared
|
Jan 3rd, 2011
|
|
Prepared By
|
Oceanside Glasstile
|
|
Product Mixture
|
No hazardous ingredients as per OSHA, 29CFR 1920.1200
|
|
Components
|
This section is proprietary.
|
|
Specific Gravity (H2O=1)
|
0.980 (8.18 lbs/US gallon)
|
Vapor Density (Air=1)
|
9 (estimated)
|
|
Vapor Pressure
|
Same as water
|
Evaporation Rate (Water=1)
|
<1
|
|
Solubility in Water
|
Miscible in All Proportions
|
Percent Volatile by Volume
|
0% (estimated)
|
|
Appearance and Odor
|
Clear Liquid
|
|
pH of Concentrate
|
2
|
|
Flash Point (Method Used)
|
Will not ignite.
|
Flammability
|
Non-flammable.
|
|
Explosion Data:
|
Sensitivity to Impact
|
None.
|
Sensitivity to Static Charge
|
None.
|
|
Combustion Products
|
As with any organic material, combustion will produce carbon dioxide and/or carbon monoxide.
|
|
Extinguishing Media
|
Water fog, carbon dioxide, dry chemical, foam.
|
|
Unusual Fire and Explosion Hazard
|
None.
|
|
Special Firefighting Precauations
|
Do not use streams of water; may spread burning liquid.
|
|
Firefighting Equipment
|
Use self-contained breathing apparatus in any enclosed area.
|
Hazard Ratings
|
Rating (based on HMIS Standard)
|
(4 = Extreme, 3 = High, 2 = Moderate, 1 = Slight, 0 = Minimal)
|
|
Health
|
1
|
|
Fire
|
0
|
|
Reactivity
|
0
|
|
Special
|
0
|
|
Stability
|
Stable
|
XX
|
Unstable
|
|
|
Conditions to Avoid
|
Avoid contact with oxidizing agents and acids.
|
|
Hazardous Decomposition
|
None expected under normal conditions.
|
|
Hazardous Polymerization
|
May Occur
|
|
May Not Occur
|
XX
|
|
Emergency Overview
|
May cause irritation to skin & eyes. PEL & TLV are not applicable.
|
|
Primary Routes of Contact
|
Inhalation
|
Yes
|
Absorbtion
|
Yes
|
Ingestion
|
Yes
|
|
Physical Hazard
|
None established.
|
|
Carcinogenicity Listings:
|
|
NTP
|
None.
|
IARC
|
None.
|
OSHA
|
None.
|
ACGIH
|
None.
|
|
Signs and Symptoms of Overexposure
|
Red, dry skin at point of contact.
|
|
Eye Contact
|
May cause irritation
|
|
Skin Contact
|
Repeated or prolonged exposure may cause dermatitis in sensitive individuals.
|
|
Ingestion
|
May cause gastric disturbances such as diarrhea.
|
|
Inhalation
|
Avoid mists, which may irritate mucous membranes.
|
|
Medical Condition Generally Aggravated by Exposure?
|
Dermatitis may become aggravated in sensitive individuals.
|
|
Emergency First Aid Procedures
|
|
Eyes
|
Remove contact lenses, flush with water for at least 15 minutes while lifting eyelids. If irritation develops and persists, contact a physician.
|
|
Skin
|
Remove effected clothing. Wash skin thoroughly with soap and water. If irritation develops and persists, contact a physician.
|
|
Ingestion
|
If swallowed, consume water frequently and in large quantities.
|
|
Inhalation
|
Move to fresh air. If irritation develops and persists, contact a physician.
|
|
Safe Handling and Hygienic Practices
|
Avoid prolonged skin contact. Wash after using.
|
|
Storage Requirements
|
Store in tightly closed, original container away from flame or other ignition source.
|
|
Small Spills
|
Dilute with water, dispose in accordance with local or state regulations.
|
|
Large Spills
|
Dike with soil and/or other suitable materials, avoiding the use of sawdust. Recover usable product, rinse area clean.
|
|
Personal Precautions
|
No special requirements.
|
Environmental Precautions
|
No special requirements.
|
|
Toxicity
|
None known.
|
|
Disposal Considerations
|
Biodegradability
|
Biodegradable.
|
|
RCRA Classification
|
This product has been evaluated for RCRA characteristics and does not meet the criteria for a hazardous waste, if discarded in its purchased form.
|
|
Special Instructions
|
No special requirements.
|
|
Engineering Controls
|
No special requirements.
|
|
Personal Protection
|
Ventilation
|
No special requirements.
|
|
Respiratory
|
Avoid breathing mist.
|
|
Eye Protection
|
Recommended but not required.
|
|
Clothing
|
Gloves recommended for sensitive individuals.
|
|
Exposure Limit Guidelines
|
None established.
|
CERCLA, State and Local Planning
(Reportable Quantities)
|
Not required.
|
|
OSHA Compliance
|
This MSDS prepared in accordance with 29CFR 1910.1200 and ANSI Z400.1 standard.
|
|
SARA Title III Superfund
|
This product in its purchased form is not regulated under the SARA “Hazard Categories” under Section 311 and 312 of the Superfund Amendment and the Reauthorization Act of 1986 (SARA Title III).
|
|
State Right-to-Know Compliance
|
Not required
|
|
TSCA
|
Although components of this product find listing under the Toxic Substances Act (TSCA), this blended product requires no import or export declaration.
|
|
Special Instructions
|
The oral & dermal properties are considered to be non-toxic and environmentally safe. This product contains no chronic health hazards.
|
|
DOT Labeling
|
Not required.
|
Proper Shipping Name
|
Not required.
|
|
Hazard Class
|
Not required.
|
Identification Number
|
Not required.
|
Waterline Tile Cleaner
A 100% natural, non-toxic, citrus-based formula that effectively cuts through body oil, sunscreen and makeup, which accumulate on pool waterlines. Designed for use with all types of pool tile and vinyl pool liners.
- Citrus-based ~ Biodegradable ~ Non-toxic
- Soap-free formula is 99.9% phosphate free
- Quickly dissolves waterline grease and grime
- Will not promote algae growth or affect pool pH
- Effective pretreatment for Calcium Releaser
Available in:
1 quart (Item # OCG-50-1002)
8 oz. (Item # OCG-50-4777)
Waterline Tile Cleaner
Application
Always test product in an inconspicuous area to determine suitability
for intended use.
Protect and mask surrounding area.
- Spray product on surface and allow to sit for 2-5 minutes.
- Agitate with a nylon scrub-brush or a mildly abrasive nylon scrub-pad (3M White or Blue pad).
- Thoroughly rinse with clean water.
- Identify
- |
- Composition
- |
- Properties
- |
- Fire Measures
- |
- Stability & Reactivity
- |
- Health Data
- Storage & Handling
- |
- Precautions
- |
- Exposure Control
- |
- Regulatory Information
- |
- Transportation
|
Product Name
|
Waterline Tile Cleaner
|
|
Product Use
|
Heavy Duty Green Degreaser
|
|
24-Hour Emergency Infotrac Number
|
800-535-5053
|
|
Date Prepared
|
Jan 1st, 2011
|
|
Prepared By
|
Oceanside Glasstile
|
|
CHEMICAL NAME
|
CAS #
|
% by weight
|
Exposure Limits
|
| D-limonene |
95327-98-3 |
<5 |
not available |
Product contains no unlisted petroleum distillates nor chlorinated hydrocarbons.
The exact composition of this formula is a trade secret.
|
|
Physical State and Appearance
|
Translucent Milky Liquid
|
|
Boiling Point
|
98 °C/208 Deg F
|
pH
|
9.70
|
Vapor Density
(Air=1)
|
1
|
Vapor Pressure
(Water=1)
|
1
|
|
Flash Point
|
>92 °C/ 198 Deg F –Cleveland open cup
|
Solubility
|
Miscible with water in all proportions
|
|
Viscosity
|
5 cps
|
Specific Gravity
|
1.012
|
|
Evaporation Weight
|
Water=1,<1
|
Percentage Volatiles
|
<5%
|
|
Extinguishing Media
|
Water, foam, dry chemical powder
|
|
Degree of fire hazard
|
Slight
|
Hazard Ratings
|
Rating (based on HMIS Standard)
|
(4 = Extreme, 3 = High, 2 = Moderate, 1 = Slight, 0 = Minimal)
|
|
Health
|
1
|
|
Fire
|
1
|
|
Physical Hazard
|
0
|
|
Stability
|
This product is stable
|
|
Incompatibility
|
Product is incompatible with strong oxidants
|
|
Corrosivity
|
Not considered to be corrosive for metals and glass
|
|
Polymerization
|
Will Not Occur
|
|
Potential Acute Health Effects
|
Slightly Hazardous in case of eye contact (irritant), non-irritant and non-corrosive for skin.
|
|
Potential Chronic Health Effects
|
Existing eye, skin and upper respiratory inflammation may be aggravated by exposure.
|
|
Carcinogenic Effects
|
Contains no carcinogens as determined by the standard.
|
| First Aid Procedures |
|
Eye Contact
|
Flush eyes with water as a precaution. Remove contact lenses. Seek medical attention if irritation develops or persists.
|
|
Skin Contact
|
Rinse immediately with water as a precaution.
|
|
Inhalation
|
If discomfort occurs move to fresh air. Seek medical attention if discomfort persists.
|
|
Ingestion
|
Have conscious person drink ample amounts of water. NEVER give an unconscious person anything to ingest.
|
| GET MEDICAL ATTENTION AS NECESSARY. |
|
Precautions
|
Keep out of the reach of children. Do not ingest. Avoid contact with eyes. Wear suitable protective clothing. If ingested seek medical advice immediately and show the container or the label.
|
|
Incompatibility
|
Strong oxidants.
|
|
Storage
|
Keep container in a cool, well-ventilated area. Keep container tightly closed and sealed until ready for use.
|
|
Small Spill
|
Absorb with an inert material and dispose in accordance with local or state regulations.
|
|
Large Spill
|
Prevent entry into sewers, basements or confined areas; dike if needed. Absorb with DRY earth, sand or other inert material. Dispose in accordance with local or state regulations.
|
|
Engineering Controls
|
Good ventilation should be sufficient to control airborne levels.
|
|
Personal Protection
|
Eyes
|
Safety Glasses
|
|
Body
|
No Special Recommendations
|
|
Respiratory
|
No Respirator Needed Under Normal Conditions
|
|
Hands
|
Gloves for Sensitive Skin
|
|
Exposure Limits
|
not available
|
|
WHIMIS
|
not a WHIMIS controlled material
|
|
Regulatory Lists
|
none found
|
|
Other Regulations
|
none known
|
|
Other Classifications
|
none known
|
|
DOT
|
Not DOT regulated for domestic ground shipments in containers <120 gallons
|
Regulated for Air
and Ocean Freight
|
Unknown
|
|